Wavlink AX1800 Setup

Wavlink AX1800 Setup

Wavlink AX1800 Setup is a crucial process to enhance your wireless network’s coverage and ensure a stable internet connection. This comprehensive guide will walk you through the setup process for a seamless experience.

Setting up Wavlink AX1800 Extender Using the Manual Method

Step-by-step instructions for manually configuring the Wavlink AX1800 extender:

  • Insert the Wavlink AX1800 extender into an electrical socket.
  • Use a smart device.
  • Open a web browser and enter either “ap.setup” or “” in the address bar, then press Enter.
  • The Wavlink extender login page will appear on the screen.
  • Enter your username and password to proceed.
  • Follow the onscreen instructions to complete the Wavlink AX1800 setup.
  • When three LED lights turn solid green, your extender setup is successful.

This manual method ensures a straightforward setup. If you have questions, feel free to contact our professional experts via the toll-free number or live chat for guidance.

Wavlink AX1800 Setup: WPS Method

WPS is a quick way to connect your extender to your existing router without having to manually enter network credentials. Take the following actions:

  • Connect the Wavlink AX1800 extender to an electrical socket.
  • Locate the WPS button on the extender and hold it for about 5 seconds until the WPS LED blinks.
  • Press the WPS button on your WiFi router within the next two minutes.
  • The connection is successful when the WPS LED on the extender turns solid green.

These are the basic steps for the WPS setup process. For detailed instructions, please refer to your device’s user manual or official documentation.

Performing a Factory Reset on the Wavlink AX1800 Extender

If you need to reset your extender to factory settings:

  • Find the reset button on your extender (usually a small hole labeled “Reset”).
  • Take a paperclip or pin and press the reset button, holding it down for approximately 10 seconds.
  • The extender will reboot, restoring all settings to default values.

Note: A factory reset erases all configurations and settings on your extender, so ensure you have the necessary setup information before proceeding.

Updating Firmware on the Wavlink AX1800 Extender:

Keeping your extender’s firmware up to date is crucial for performance and security:

  • Visit the Wavlink support website and go to the “Downloads” or “Support” section.
  • Locate your extender’s model and download the latest firmware update.
  • Access the extender’s setup page as explained in the “Manual Setup Method.”
  • Look for an option in the settings menu labeled “Firmware Update” or “Software Update.”
  • Upload the downloaded firmware file and follow the onscreen instructions to complete the update.

Please note that firmware upgrade procedures may vary depending on your extender’s model and version, so always refer to the user manual or official guidelines.

Troubleshooting Steps:

If you encounter issues with your Wavlink AX1800 extender, try these troubleshooting steps:

  •  Ensure the extender is within your router’s range for a strong signal.
  •  Restarting the extender can often resolve connectivity issues.
  •  Relocate the extender if nearby electronic devices or obstacles interfere with the WiFi signal.
  •  Verify your WiFi network name (SSID) and password for typos.
  •  Keep your extender updated with the latest firmware version.
  •  As a last resort, perform a factory reset and reconfigure the extender.

By following this Wavlink AX1800 setup guide and troubleshooting tips, you can optimize your extender’s performance and enjoy extended WiFi coverage with faster internet speeds. For further assistance, contact our technical experts through our toll-free number.


real estate agents email list Previous post From Leads to Clients: Nurturing Relationships through Real Estate Agents Email Lists
Fashion Hoodie Style: The Hoodie as a Fashion Statement Next post Recent Hoodies Fashion Ideas for Winter Outfits

Leave a Reply

Your email address will not be published. Required fields are marked *